MID series InRows are compatible with MCO series condensers. InRows of this category are available in standard widths of 30 and 60 cm and in different capacities. The compressors used in this category of products are from two different types. The first type of scroll compressors are constant speed with ON-OFF control and the second type are BLDC compressors with variable speed control. In fact, BLDC compressors provide InRow system with an additional control mechanism to precisely match the cooling load produced with the load imposed by the data center equipment. This reduces the response time to temperature adaptation. On the other hand, the electronic expansion valve and the variable speed fans of the InRow and the condenser help to adjust the temperature precisely.

The InRows that are placed in this category are compatible with the front and up flow condonsers with the desired capacity. In case of limited access, the respected employer can choose any of these two models depending on the existing dimensional limitations.

Specifications of condensing units 

Note:

 The device is fed through 3-phase 380 volt electricity and the condenser is fed through the internal unit

The most important specifications MID InRows:

1. The frame structure is made of ST37 oil sheet with high resistance
2. Electrostatic powder paint on the InRow body with RAL 9005 code
3. Use of electric expansion valve
4. Using all control equipment from Carel brand
5. The ability to feed the device from two separate power sources and switch between them (according to request)
6. The ability to separate each fan from the system separately, even when the system is working
7. High energy efficiency with variable speed fans of the InRow unit and the condenser unit
8. The use of high-life constant scroll compressors in MID 30151 models, and also variable-speed rotary compressors in MID 30201, MID 30301, and MIC 60401 models in order to accurately match the cooling to the requested load.
9. Connecting to the network through Modbus TCP_IP and SNMP protocols and the ability to connect through BACnet protocols
10. The possibility of networking (Rotation) several InRow with each other up to 16 numbers
11. Functionality in 3 different control modes Supply only, Return only and Supply+Return
12. Ability to install filter dirt warning sensor (optional)
13. Ability to install a drain pump in the pan (optional)
14. Ability to install a separate leak sensor (optional) apart from the pan float sensor
15. Equipped with a float sensor in the pan
16. Use of coil with Blue Fin technology for longer life
17. Installing the compressor in the interior space of the InRow in order not to be affected by the temperature gradient of outside
18. Ability to work 365*24*7
19. The ability to install a humidifier inside the InRow
20. Equipped with reheater (only in MID 60401 model)